MMF POS Verifone VX810 & VX820 Handheld User Manual.
MMF POS Equipment.
Transaction Terminal Stand (P/N:225.
Transaction Terminal Stand (P/N:225--7591.
Quick Installation Instructions.
Designed for Verifone® VX810.
Remove stand from packaging box. Firmly secure the base pole by bolting four (4) screws through the base plate to a flat counter surface. (Screws are not included as they need to suit your specific desktop or platform thickness) .
Mount payment terminal to stand by sliding in place, aligning the two holes in the top & bottom of the Verifone® VX810 unit to the two holes of the stand’s mounting plate.
Secure the terminal by tightening the two button head cap screws behind the mounting plate using the Allen Wrench provided in the kit.
Note: Images are not to scale.
Clearance Cable Slot.
Holes to secure Verifone® VX810 terminal to stand (Screws included in kit)
Cable Management Hole.
Secure the stand’s tilt adjustment as desired by tightening the two side thumb screws on the mounting plate on each side of the stand.
Make cable connections as needed . Guide cable connections down and out through the bottom opening.
For parts and/or additional accessories, contact your supplier or visit our website at www.mmfpos.com.
COPYRIGHT BY MMF POS COMPANY, WHEELING, IL.
TOOLS AND HARDWARE REQUIRED • One (1) Allen Wrench is included with kit to tighten the button head cap screws from behind the mounting plate.
• NO other hardware or tools are included for mounting stands to a surface. Hardware will need to suit your specific desktop or platform thickness.
• Phillips Head Screwdriver or power drill will be required to mount stand to surface (if necessary).
| 
